We serve Northland and Auckland area.

0800 101 232

Test and Tag Auckland

Faulty electrical appliances in Auckland are a hazard that’s invisible to most employers and employees. Would you know if you have damaged or broken devices on the production floor? Sure, it works in its damaged condition, but that doesn’t mean it is safe to use?

Picture this scenario: You walk into your office or production work area and discover the electrical cord on a piece of equipment is worn with bits of the insulation sheath frayed.

Now typically we might all be known to just wrap tape around the worn-out spot and call it a day. The appliance should not be used nonstop or until it breaks apart.

Test and Tag Auckland

Auckland Test & Tag means that the equipment will be check to see if it still works, but this also determines if the electrical appliance is safe to use and will not cause harm.

If you think replacing electrical devices is expensive, the cost of liability is much higher. Remember an employer bears the burden of any incident that will result in serious bodily injury or death. Hazard situations like electrocutions and burns are preventable, and it shouldn’t happen in the first place.

So just how safe are the electrical leads and appliances in your Auckland workplace?

As per AS/NZS 3760, electrical safety and measuring for leakage should be upheld. This simply means you can’t just mull it over and wait for appliances to fail and cause accidents. Prevent potential accidents, injuries and costly property damage through Test & Tag.

What is Auckland Test & Tag?

Test and Tag servicing is the inspection process by which electrical devices, appliances, tools, equipment, or machinery is thoroughly inspected, using meter-testing devices such as a Portable Appliance Tester (PATs). These special devices have settings to detect leakages, fluctuations and precise readings. A Test and Tag specialist from Fireco can read the measurements and indicate whether your device is good for use, up for repair or in need of replacement.

Looking for electrical faults and testing for possible leakage takes great skill, electrical knowledge and safety training. Here at Fireco, we have the proper set-up to do the necessary Test & Tag servicing- we do it efficiently and safely.

Trying to get a Test & Tag done but finding the right electrical safety expert in Auckland has proven a bit difficult for you?

We can do the following Auckland Testing & Tagging services for you:

Regular frequency of Test & Tag is key to maintaining electrical items in good working order. Call us today and don’t hesitate when it comes to safety- reach out to Fireco 0800 101 232 or email info@fireco.co.nz

Fireco has the expertise and years of experience when it comes to efficient and dependable Auckland Test & Tag services.

BECOME A FIRECO FRANCHISEE

Join a respected team of building compliance and fire safety professionals.

ENQUIRE ABOUT OUR TEST AND TAG SERVICE